| Specification | Description |
| Solvent stocker |
| Bottle | 3 L bottle × 1 |
| Method | Hot-air circulation, PID control |
| temperature | 40 ºC (5 ºC higher than room temperature) |
| Safety systems | Monitoring by temperature sensor – embedded software, |
| | Thermal fuse (70 ºC) – circuit, Liquid drain |
| Degass unit |
| Method | Vacuum type |
| Purge system |
| Method | Syringe type |
| Pump oven |
| Method | Hot-air circulation |
| Temperature | 40 - 50 ºC |
| | (1 ºC step, 10 ºC higher than room temperature) |
| Safety systems | Monitoring by temperature sensor – embedded software, |
| | Thermal fuse (70 ºC) – circuit, Gas sensor, Door sensor, Liquid drain |
| Pump |
| Flow mode | Parallel (Quick return) |
| Flow rate range | 0.10 – 2.00 mL/min (0.01 mL step) |
| | The reference flow rate is set in the ratio[1, 1/2, 1/4] |
| | with the sample flow rate |
| Accuracy | ± 2 % or ± 0.005 mL/min whichever greater |
| | (H2O, 1 MPa or more, 1.2 mL/min or less) |
| Precision | ± 0.2 % or ± 0.001 mL/min whichever greater |
| | (H2O, 1 MPa or more, 1.2 mL/min or less) |
| Pressure setting range | 0.0 – 15.0 MPa (0.1 MPa step) |
| Drain valve | Electroactuation |
| Auto sampler |
| Measuring method | Loop measurement |
| Sample loop | 300 µL (500 µL loop is attached, 10 – 500 µL loop is available) |
| Reproducibility | CV 0.5 % |
| Number of vials | 24 |
| Vial volume | 10 mL |
| Temperature | Aluminum block heating, PID control (sample table) |
| control method | |
| Range | 40 -220 ºC |
| | (1 ºC step, 10 ºC higher than room temperature) |
| Safety systems | Monitoring by temperature sensor – embedded software, |
| | Thermostat (250 ºC) – circuit, Door lock during table moving, |
| | Sample cup sensor, Needle crash sensor, |
| | Duct for local ventilation |
| Valve box (Temperature control for injection valve) |
| Method | Aluminum block heating, PID control |
| Range | 40 - 220 ºC
|
| | (1 ºC step, 10 ºC higher than room temperature) |
| Maximum pressure | 15 MPa |
| Safety systems | Monitoring by temperature sensor – embedded software, |
| | Thermostat (250 ºC) – circuit, Gas sensor |
| Column oven |
| Method | Hot-air circulation, PID control |
| Range | 40 - 220 ºC |
| | (1 ºC step, 10 ºC higher than room temperature) |
| Column capacity | 30 cm columns × 8, guardcolumn × 1, Inlinefilter × 1 |
| Safety systems | Monitoring by temperature sensor – embedded software, |
| | Thermostat (250 ºC) – circuit, Gas sensors (2) , |
| | Door lock at high temperature, Door sensor, Liquid drain |
| RI detector |
| Method | Bryce type double path and dual flow |
| Light source | Tungsten lamp |
| Flow cell | Made of quartz glass, volume; 10 µL, |
| | Maximum pressure; 0.3 MPa |
| Drift | 3 × 10-7 RIU/h (ODCB, 1.0 mL/min, 145 ºC) |
| Noise | 1.5 × 10-8 RIU (ODCB, 1.0 mL/min, 145 ºC, response; 3 s) |
| Temperature range | 40 - 220 ºC |
| | (1 ºC step, 10 ºC higher than room temperature) |
| Safety systems | Monitoring by temperature sensor – embedded software, |
| | Thermostat (250 ºC) - circuit |
| Drain stocker |
| Bottle | 3 L bottle × 1 |
I/O terminals
|
| PC communication | USB |
Power supply ratings
|
| Voltage | AC 100 – 240 V |
| Frequency | 50/60 Hz |
| Power consumption | 1500 VA |
Dimensions and Weight
|
| Outside dimensions | 1000 (W) × 650 (H) × 500 (D) mm (excluding projections) |
| Weight | 125 kg |